iBotModz Tutorials

How to change your IP address

Wed, 21 Jul 2010 16:12:12 +0000

1.First you go to start down in the bottom left look around on the start menu and find search.

2.Click search and type in CMD.

3.Once you type that in the command prompt will pop up.

4.Then right where your cursor is type this exactly: Ipconfig/release

5.Once you type that in your internet connection will be released or just put away at the moment no worries you will get it back.

6.Now leave everything open you had before and go to the start button again and click my computer

7.Once you click that another window opens and then you right click my network places and click properties.

8.You now have all of your connections in front of you.

9. Right click the one that is disconnected and or the one you usually are on. and then click properties again.

10.Look down the list for Internet protocol (TCP/IP) Once you find it double click it and choose the marker to use the following IP address.

11.Then change it to whatever you want but make it under 200 for every spot in the IP.

12.Now click on subnet mask and click tab and make sure it stays that way and leave default gateway alone or blank.

13.Then click ok (were not done yet) Now you can check your IP with command prompt by typing in just ipconfig.

14.But if you want to get your interenet connection working again follow this.

15.Go back to my network places right click it go to properties again.

16.Right click on the connection you did before and click properties again.

17.Then check obtain an IP address automatically. then select ok and Ta da Your IP Address has been changed to what you wanted it to be!

How to switch a KV on your JTAG

Wed, 21 Jul 2010 16:07:07 +0000

Moving from XBR to freeBoot 0.32

Tue, 29 Jun 2010 00:12:17 +0000

First we are going to need some things.

Requirements
[list][*]CPU Key (Tutorial for obtaining)[*]1BL Key (Google it, cannot be posted legally. It starts with a D and ends with an A)[*]Hex Editor (HxD Hex Editor Download)[*]Mobo Files (mediafire link)[*]libeay32.dll (Google your computer for it, I guarantee one application has it. Then simply copy it to needed location)[*]Kernel 9199 files (ask around, or xbins /XBOX 360/development/freeBOOT/)[*]freeBOOT v0.032 (ask around, or xbins /XBOX 360/development/freeBOOT/)[*]Flash360 (download)[/list]
Steps

1. Using the CPU Key tutorial, obtain the CPU key and save it to a txt file for future use.

2. Use Flash360 on your jtagged xbox, and save a Full Nand Backup to the root of the HDD / Flash Drive

3. Obtain that file, via the flash drive or connecting your hard-drive to your computer from one of these methods.

4. Open that file in a preferred Hex Editor.

5. At the very top of the file you should see something similar to CB0=#### (see screenshot below)

6. Record that 4 digit number in the same txt folder as your CPU key.

7. Obtain via Google or elsewhere the 1BL Key.

8. Copy that key to that same txt file too.

9. Your txt file should now look similar to this.

If you have all 3 digits, then continue. Otherwise, please re-read steps 1-9.

10. Extract the freeBoot package.

11. Move the libeay32.dll from the requirements into the root of the folder (see below)

12. Copy your XBR3 Backup file from step 4, into the bin folder

13. Open up Command Prompt

14. Change Directories to this location.

Type

cd full location to files.

example

cd C:\Users\iBotPeaches\Desktop\360_Flash_Tool_v0.94\freeBOOT-0.032\freeBOOT-0.032

15. Now copy this code

ibuild x -d data\ -b 1BLKEY -p CPUKEY bin\flashdmp.bin

Quote

Replace
1BLKEY = Key from Step 7, the 1BL Key.
CPUKey = Key from Step 1, the Xbox 360 CPU Key

16. This should error out, since it is an XBR file, and not a clean file. Ignore the error and continue.

17. Navigate to the freeBOOT-0.032\data folder and delete everything but kv.bin, smc.bin and smc_config.bin

18. Extract the kernel 9199 files directly into the data folder

19. You should have a lot of files.

[img]http://i49.tinypic.com/21e5j15.png[/img]

20. Open up the downloaded mobo_files , and locate your motherboard revision (EX: xenon) and the CB0 type (step 5)

21. Traverse the file system of the mobo_files opening your mobo revision, and then CB0 type.

22. Copy the files (crl.bin, crl.bin.meta, extended.bin, extended.bin.meta, odd.bin, odd.bin.meta, secdata.bin, secdata.bin.meta) from the mobo folder into the freeBoot data folder.

23. Re-open Command Prompt.

24. If needed, redo steps 13-14 to change to the right directory

25.Type this code

ibuild.exe c freeBOOT -c CONSOLE -d data\ -p CPUKEY -b 1BLKEY bin\images.bin bin\fuses.bin

Quote

Replace

CONSOLE = falcon, xenon, jasper, jasper256 or jasper512
CPUKEY = CPU Key from step 1
1BLKey = 1BL Key from step 7

26. Hit enter and the process should complete without errors. If it does error, restart my tutorial right now.

27. There is now an image.bin file in the bin folder that happens to be the same size as your XBR dump.

28. Rename image.bin to updflash.bin and re-transfer back to your flash drive or HDD (Do the reverse of step 3)

29. Boot your jtagged 360 and boot Flash360.xex

30. Click A, B, A and that will re-flash that image to your xbox.

31. If anything errors, restart my tutorial again.

32. If all succeeded the xbox 360 should restart.

33. Upon restarting it will act like a new xbox asking for your language. You got it

34. Verify in the settings menu that your current dash is 2.0.9199.0

Obtaining CPU Key

Mon, 28 Jun 2010 23:39:08 +0000

Xellous is what you need to boot to grab your keys. However, it can only be booted by holding down the eject button.

You then will be greeted by a blue/black screen with digits flying.

You must take a picture of the digits when they appear, as its impossible to memorize that fast

Picture above shows an example xell shot that you would want to take.

Next you'll want to take number 3 & 5, or 4 &6. These combinations of numbers make up your CPU key.

So for example.
Lets take 3 and 5 (fake numbers)
3= xxxxxxxxxxxxxxxxxxxxx
5= yyyyyyyyyyyyyyyyyyyyy

Which makes our CPU Key xxxxxxxxxxxxxxxxxxxxxyyyyyyyyyyyyyyyyyyyyy

Unlock Everything in MW2

Wed, 24 Feb 2010 12:15:00 +0000

http://www.youtube.c...h?v=5FTwvE7Bjms

Quick Text Version:

[list][*]Make New Account[*]Play 1 game of MW2[*]Use whatever means you use to access HDD[*]Navigate to your new profile on Partition 3[*]Find the mpdata(random numbers) file[*]Move to your desktop[*]Open that file in the mpdata Editor[*]Edit the file to your content[*]Save the file[*]Re-transfer the file back to your xbox.[*]done.[/list]

Use iPhone/iPod Touch as a Wi-Fi adapter (PC)

Tue, 23 Feb 2010 04:18:59 +0000

Use your iPhone as a Wi-Fi adapter

1. Download PdaNet on your iPhone.

2. Launch PdaNet and click settings, choose "USB Mode".

3. On your Windows PC go to http://www.junefabrics.com/desktop/ and download the exe and install. (You also need iTunes)

4. After you install, plug your iPhone into your PC and it will automatically connect. If it doesn't, right-click the icon and and select "Connect".

Modern War 2: Inf Carepackages

Sat, 30 Jan 2010 23:33:23 +0000

This glitch allows you to retain another care-package, after you pick up the previous one.
This also works for ANYTHING that can be thrown, like Sentry Guns and Emergency Airdrops.

Steps:

[list][*]1) Get a care-package, by 3 or 4 kills (depending if you have hardline)[*]2) Locate an obstacle, that the A button will prompt. "Press A to Jump Over"[*]2a) The obstacle, must force your weapon away as you go over it.[*]3) Take out your care package marker.[*]4) Mount the obstacle to climb over[*]5) When you are directly above it, click right on the d-pad to pull out the care package marker.[*]6) If you go over the obstacle with the care package marker still in hand, you've done it right.[*]7) Simply throw the care-package, after you pickup the box. You will have another.[*] Repeat 2-7 again[/list]
[warn]It has been patched as of February 19, 2010.[/warn]

Key Points
1) You cannot be using Marathon Pro, as you climb too fast
2) If you receive Ammo in the box, do not pick it up. Kill yourself, and you'll have another care package, assuming you did steps 2-7 correct.

Best Scenario:
Make sure you have Care-Package, Sentry Gun, and Emergency Airdrop as your killstreaks. Now get 4 (possibly 5) kills and get back to your base. Set up your sentry guns using the inf glitch, so that you are protected. Those Sentrys if you didn't die will carry you to Emergency Airdrop. Simply then call airdrop after airdrop.

Avatar: Game

Wed, 06 Jan 2010 23:30:54 +0000

[img]http://img11.imagesh...90/22421728.jpg[/img]
open in any hex editor.

[img]http://img24.imagesh...17/90609859.jpg[/img]
search for "TotalEP" then change the number in the " " to 50000.

Then Save and resign.

JTAG Hack an Xbox 360

Mon, 04 Jan 2010 20:35:29 +0000

This tutorial will be made as I make it. I'm currently performing the JTAG hack on my own xbox and will post tutorial results as I complete them.

Part 1: "Gathering your materials"
Written by iBotPeaches

First off, we will be making a "clean" nand dump connection. This means you will be able to remove the cable without de-soldering. Thus, you won't have cables anywhere. This tutorial also assumes you know how to take apart your xbox 360. This is the tutorial I used for taking apart my xbox.

Requirements:
(Most of these items can be picked up at a local RadioShack.)

[list][*]A computer with a LPT Port, and 32 bit OS (Figure 01)[*]Xbox 360 with older dash then 8495 (Figure 03)[*]Xbox Hard Drive[*]DB25 25-way male plug (RadioShack Link) (Figure 02)[*]D-Sub hood 25-way (RadioShack Link) (Figure 02)[*]Standard RJ45 / CAT5 Cable (If you require one, buy a cheap one)[*]2-6 100ohm resistors ( RadioShack Link)[*]Soldering Iron (RadioShack Link)

Computer Based Applications[*]Total Commander (File Compare Program)[*]360 Flash Tool (Program)[*]NAND Compare (Compare NANDs)[*]NAND Pro (It only worked on 32bit XP for me.)[*]Degraded (Used for testing nand dump for bad blocks)[/list]
This apps can be downloaded from our jtag section

Not required, but helpful items.
[list][*]Flux (Make clean solder points)[*]Multimeter (Check your points, and double check to prevent problems)[*]Electrical Tape (Tape down your cables to prevent snagging)[*]Low Soldering Iron (You need one, just a low watt one)[/list]

Key Points
[list][*]You can use a variety of switching diodes such as BAT41, N4148 or PH4148.[*]The resistors are not needed on some setups, it just protects your xbox and prevents silly errors[*]Please please be careful when soldering, and use a low watt iron. Something too strong will lift traces and make a horrible experience.[*]Most errors are caused by a long cable, so try and make all connections involved in your NAND dump as short as possible.[/list]

Images:
(Figure 01)
[img]http://ibotmodz.net/img/Parallel_t.jpg[/img]

(Figure 02)
[img]http://ibotmodz.net/img/jtag%20007.JPG[/img]

(Figure 03)
[img]http://ibotmodz.net/img/xbrtut1.jpg[/img]

Part 2: "Checking if your console can be modded."

This will be a short segment to double check if your console is moddable. Meaning it hasn't been auto-updated to a newer dash that prevents rebooting. However, even if your console passes these test you will encounter another check after your NAND dump that will be the final decider if you can mod or not.

Step 1) Turn your console around, and locate the barcode.

2) Above the bar code is a field called "MFR Date" in the format of YYYY-MM-DD.

3) Hope that the number is earlier than January 9, 2008

4) Turn on your xbox, pre-nxe or not the way to get to settings are quite similar

5) Under system settings and look in the top right corner. There will be a number, It will be in the format 0.0.0000.0

6) The set of numbers in a group of 4, will be the numbers to write down. They will range from 1888 (First xbox) to 8955 (Most updated)

7) If you plan to use XBReboot, the limit is 7371. Past that, and you can no longer mod.

Refer to this site: Xbox 360 Kernels for learning more about the various kernels.

Part 3: "Lets open the box, and find out the mobo type"

Once your box is opened up, there are 5 motherboard revisions (soon to be 6) that we must check to identify what version you are. Instead of me trying to explain it all, go here and figure out what console motherboard revision you have. All you do is compare the pictures with your opened box. If you haven't taken off the heatsinks (not required) then look in the top right corner to compare.

As of now, the jtagging wiring has 2 schematics. I will be making my own for the Xenon board, and be providing other users diagrams for the other board types. These diagrams will be released in due time, once I have a High Def camera to borrow.

One for Xenon boards, and one for the group of Opus, Falcon, Zephyr, and Jasper

How to build a desktop computer part 3

Wed, 02 Dec 2009 01:10:20 +0000

to know exactly what parts I used and for what prices, read

this forum in the tech

center.

Parts Required for this tutorial:
All parts required
Processor
Motherboard
RAM
heatsink
case

First, the motherboard. You gotta mount that thing into the

case. You should see nine holes in the motherboard and in the back of the

case. They should be in the corners, halfway between the corners, and one

in the middle of the motherboard. There should also be a small bag of

screws that came with the case. Mine came with eight so I left the middle

hole empty.

[IMG]http://i481.photobuc...t8/IMG_0445.jpg[/IMG]

Step 2: Once you have it mounted in, next it's time for the proccesor. Be very careful with this!
You don't want anything to harm this little guy. He's the brains of the computer.

He should go into the motherboard right in this slot:

[IMG]http://i481.photobuc...t8/IMG_0449.jpg[/IMG]

open the slot by pulling the small silver rod toward you, place the processor in the correct way and close the silver rod.

DO NOT FORCE THE PROCESSOR IN! IT SHOULD SLIDE IN NATURALLY!

[IMG]http://i481.photobuc...t8/IMG_0450.jpg[/IMG]

then put the heat sink on top of the processor. It should latch on pretty easily if it is an AMD heatsink. Not sure about the Intel ones.

The heatsink should have come with your processor and if it didn't, get one somewhere else before continueing. It is also very important your processor doesn't overheat.

Every Heatsink and motherboard is different, so refer to yous motherboard instruction booklet for this one. Once placed on, the heatsink should look like this:

[IMG]http://i481.photobuc...t8/IMG_0454.jpg[/IMG]

Plug the heatsink into the motherboard in the appropriate power slot. Every motherboard is different for this one too, but mine happens to be right there.

Step 4: RAM!
You should see 4 (again every motherboard is different) slots real close to each other off to one side. That is where the RAM plugs in. I recommend at least 2 GBs of RAM for the average computer. Im going to plug in 4 GBs.

Take the slots of RAM you have. find the side that has a gold tip and plug that into slot. It takes a tiny bit of force to make it go in, but once it is in, snap the clamps down, so it doesn't go anywhere.

AGAIN, DO NOT FORCE IT TOO MUCH!!!
Make sure the RAM cards are facing the right way before trying to insert them. They should look like this:

[IMG]http://i481.photobuc...t8/IMG_0458.jpg[/IMG]

If you have all of this done, you are ready to plug it all in!!

Part 4 will be up in a few minutes